Pneumatic Actuators-Products-NUTORK CORP

Specializes in the manufacturing of a comprehensive range of pneumatic / electric actuators

Home

Categories

E-mail:
nutork@nutork.com

Tel:
+86-21-59887103 / 59887203 / 59888436 / 59888463

Address:
No.11, Lane 900, Zhuguang Road, Qingpu District, Shanghai, China

Pneumatic Actuators

NK (Alu. Alloy) & NKSS (S.S.) Series Rack & Pinion Pneu. Actuator

Sizing example of NUTORK double acting actuator:
Valve torque 100Nm plus 20% safety factor= 120Nm. Minimum operating pressure 6bar(87psig). By reading down the 6bar(87psig) column the figure below 120Nm is 135.0Nm, The model number shown in the left hand column is therefore NKD-092.

NS Series Scotch Yoke Type Pneumatic Actuator,Alu. Alloy

Temperature Range:
Standard:-20°C(-68°F) to +80°C(+176°F)
Lower Temp.: -60°C(-140°F) to +60°C(+140°F)
High Temp.：0°C(+30°F) to +150°C(+300°F)

NSF07S~14S Series Scotch Yoke Pneumatic Actuator

High performance and high reliability
Fully compliant with the latest international standards and regulations
More applicable to a wide range of specifications and torque requirements
Compact design is better suited for a variety ofindustrial applications

NSF Series Scotch Yoke Type Pneu. & Hydraulic Actuator, Welded Module

Advantages
Water Ingress Protected
O-Rings are fitted on bodies, caps and so on-this ensure water ingress protected.
ISO Valve Mounting
The NSF Series actuators interface meets ISO standard,and meets the dimensional requirements of ISO defined for each torque range.

NSF Series Scotch Yoke Type Pneu. Actuator-Internal Tie-Rod Design, IK

Product Characteristics
NAMUR Mounting
The accessory mounting holes of NSF series pneumatic actuators are in accordance with NAMUR standard, which is convenient for mounting position switches,positioners and other accessories.
ISO Connection Dimension
The flange size of NSF series pneumatic actuators and valves meets ISO 5211 international standard, which is convenient for customers to install, disassemble and replace.

NSF Series Scotch Yoke Type Pneu. Actuator-External Tie-Rod Design

Advantages
Water Ingress Protected
O-Rings are fitted on bodies, caps and so on, this ensure water ingress protected.
ISO Valve Mounting
The NSF Series actuators interface meets ISO standard,and meets the dimensional requirements of ISO defined for each torque range.

NSF Series Scotch Yoke Type Hydraulic Actuator

NSF in extreme cold environment In extreme environment application, PTFE is used for seal and temperature pressure vessel steel (O9MnNiDR) is used for each module. The body will be welded with 09MnNiDR.

NSF Series Linear Type Pneumatic Actuator

Large Thrust Range
NSF series double-acting actuators can provide a maximum output thrust of 2000000N, and single-acting actuators can provide a maximum output thrust of 300000N (working pressure 3-7 bar)

< 1 >