Products-Products-NUTORK CORP

Specializes in the manufacturing of a comprehensive range of pneumatic / electric actuators

Home

Categories

E-mail:
nutork@nutork.com

Tel:
+86-21-59887103 / 59887203 / 59888436 / 59888463

Address:
No.11, Lane 900, Zhuguang Road, Qingpu District, Shanghai, China

Products

PTFE & PFA Lined Butterfly Valve

NUTORK CORP.manufactures a wide range of pneumatic actuators, electric actuators and the accessories of pneumatic actuator (limit switchbox, solenoid valve, manual override ---etc.) for quarter turn valves

Double Eccentric High Performance Butterfly Valve, PTFE Seat

Gvs designed for critical applications has proven rliability and efficiency in a wide range of applications
The Double eccentric design minimizes the on-off torques at High Pressure, providing bubble tight shut-off.

PN10 & 16 Double Eccentric Butterfly Valve, Rubber Seat

Specification
Meet or exceed the requirements of EN593.
Double Eccentric Type.
Rubber Seat Ring clamped on the Disc.
Stainless Steel Seat welded on the Body.
Mounting Flange in accordance with ISO 5211.
Flange and Drilling comply with EN1092 PN10/16.

Tripple offset butteryfly valve

DESIGN FEATURE
Triple Offset
Bi-Directional (Reduced Pressure at Reversed Direction)
Low Emission
Blowout Proof Stem
Fire Safe Tested Design (optional design)

ISO5211 Direct Mounted Ball Valve

AVAILABLEOPTIONS
Other Alloys Steel Upon Request. Casting per NACE/MR-01-75 for Sour Gas Service.
NACE/MR-01-75

PFA Lined Ball Valve

ball valves are ideally suited for corrosive applications, requiring reliable performance, tight shutoff, and constant torque The valves successfully handle a multitude of corrosive applications in industries such as chemical, petrochemical, pharmaceutical, pulpand paper, foundries and mining like sulphuric acid, etc.

Ceramic (ZrO₂) Lined Ball Valve

Applications: Applied to any media, but HF (Hydrofluoric Acid), with Max. Temperature 500'C and Max.Pressure 5.0Mpa.
This valve has incomparable advantages under using in high corrosion, and high attrition.
Structure: 3-part flange type flowing ball valve, Flange, According to DIN/ANSI/API/JIS

V port Segmented Ball Valve (Trunnion Mounted Ball Design)

Flange drilling: PN10-25/150LB/JIS 10K/AS 2129
Material: WCB/CF8/CF8M/ALLOY
Operation: Manual, pneumatic, electric, hydraulic

O type Metal Seated Ball Valve

NUTORK metal seated ball valve is an bidirectional flanegd (DN15~DN60o) valve which is designed for on/off and modulating control in a quarter-turn valve in general industrial service applications.
The design of the ball and seat assures non-clogging shut-of on suspended solids in the industries of Pulp & Paper、Wastewater Treatment Plants、Chemical Plants、Mining -- etc.

ANSI Trunnion Mounted Ball Valve

Cast steel trunnion mounted ball valves are designed. manufactured andtested in accordance wilh API 6D,ASEM B16.34, and certified to API 607 sixth edition,API 6FA 3rd edition fires safe tested design.Nuork cast steel trunnion mounted ball valves has two optional structure design ' two piece side entry'and "three piece side entry 'and the size range is from 2 inch up to 48 inch, pressure rating is from 150LB up to 600LB.